The 2004 Ford Mustang GT headlight and fog light bulbs have a limited lifespan and require replacement after they burn out. Burnt-out headlight and fog-light bulbs can pose a security threat except the bulbs are changed immediately. Unlike with many automobile repairs, 2004 Ford Mustang GT owners can save time and money by replacing the bulbs themselves as a substitute of taking the vehicle to a service center.

2004 Ford Mustang GT Headlights Installation Instructions

1. Park the automotive on a degree surface, ensure the headlight swap on the left aspect of the steering column is in the “Off” place and open the hood.
2. Pull up on the 2 retaining pins behind the headlight assembly. The pins are used to hold the headlight assembly within the body of the vehicle.
3. Slide the headlight assembly ahead out of the body and pull the electrical connector off the again of the headlight bulb.
4. Twist the plastic headlight bulb retaining ring to the left, pull it off of the headlight meeting and then pull the headlight bulb out of the assembly. Discard the previous headlight bulb.
5. Insert the replacement headlight bulb into the headlight meeting, slide the headlight bulb retaining ring onto the assembly and twist it to the correct to lock it in place.
6. Plug the electrical connector onto the headlight bulb and slide the headlight assembly again into the frame.
7. Reattach the 2 retaining pins to safe the headlight meeting within the vehicle.

2004 Ford Mustang GT Fog Lights Installation Instructions

1. Park the car on a degree surface, interact the emergency brake and turn the headlight change to the “Off” position.
2. Slide underneath the front of the automobile to access the fog-light assembly. The fog lights are constructed into the entrance bumper, below the headlights.
3. Twist the fog-light bulb socket to the left and pull it out of the fog-light assembly.
4. Pull the electrical connector off of the bulb and pull the bulb out of the socket.
5. Insert the replacement bulb into the socket and fasten the electrical connector.
6. Place the socket within the fog-light meeting and twist it to the best to lock it in place.